Single cylinder hydraulic cone crusher is a kind of efficient crushing equipment, which is widely used in mining, construction, road construction and other fields. However, during use, single cylinder hydraulic cone crusher may have various faults, affecting its normal operation and production efficiency. XinGaonai introduces the common faults of single cylinder hydraulic cone crusher and their solutions.

1. Common faults of single-cylinder hydraulic cone crusher

(1). The crusher discharge port is unreasonable, resulting in poor discharge effect;

(2). The crusher lining is worn, resulting in reduced reliability and efficiency of the crusher;

(3). Hydraulic system failure, resulting in insufficient pressure in the oil tank or abnormal operation of the hydraulic cylinder.

(4). Transmission system failure, such as gear wear, bearing damage, etc.

(5). The raw material is too coarse, resulting in slow feeding speed;

2. Maintenance methods of single-cylinder hydraulic cone crusher

(1). Adjust the crusher discharge port

According to the characteristics of the raw materials, adjust the position of the crusher discharge port and feed port to make the discharge more uniform and improve the efficiency of the crusher. At the same time, it is necessary to regularly check and clean the debris and accumulated stones at the discharge port to avoid affecting the crushing effect.

(2). Replace the crusher liner

The crusher liner is an important component of the crusher and has a direct impact on the efficiency of the crusher. After a period of use, the crusher liner will wear and lose its original crushing effect. Therefore, it is necessary to regularly check and replace the liner to ensure the efficiency and reliability of the crusher.

(3). Hydraulic system fault handling

The hydraulic system is an important part of the single-cylinder hydraulic cone crusher. It is necessary to regularly check the oil volume and oil quality in the oil tank to ensure the normal operation of the hydraulic system. If a hydraulic system fault is found, it is necessary to deal with it in time, replace the faulty parts, and refill the oil.

(4). Transmission system may have fault handling

These faults will affect the normal operation of the equipment and even endanger the safety of the operator. The solution is to strengthen the maintenance and care of the transmission system, regularly check the working conditions of gears, bearings and other components, and replace severely worn parts in time.

(5). Other common fault solutions

If the single-cylinder hydraulic cone crusher has abnormal noise, vibration and other faults, it needs to be checked and handled in time. Specific methods include adjusting the support of the crusher, cleaning the debris in the crusher, checking the electrical system, etc.

In short, the maintenance of single-cylinder hydraulic cone crusher requires attention to the maintenance and care of each component. In daily use, the crusher needs to be regularly inspected and maintained to avoid failures and reduce maintenance costs. Through the introduction of Xingaonai, I hope it will be helpful to everyone.

tags: Mining Exhibition Xingaonai Exhibition Novokuznetsk jaw crusher cone crusher hammer crusher hammer crusher cone crusher stone crusher xingaonai River sand Sea sand impact crusher mobile crusher​ roller crusher Mobile crusher щековую дробилку spring cone crusher Uzbekistan Tashkent
URL: https://www.xgncrusher.com/Industralnews/752.html