Causes and solutions for splashing oil leakage of multi-cylinder hydraulic cone crusher

Multi-cylinder hydraulic cone crusher is a commonly used mining equipment, widely used in mining, chemical industry, road and bridge construction, construction and other industries. However, during use, many users will encounter a common problem, that is, splashing oil leakage. Splashing oil leakage is mainly caused by the large size design of each moving pair, fast relative speed, and large bearing capacity, which leads to large heat energy generated. It will not only affect the normal operation of the equipment, but also bring safety hazards to the working environment. It has become a problem that needs to be solved urgently. Xingaonai helps you find the cause and treatment of splashing oil leakage:

Causes of splashing oil leakage:

1. Oil leakage in the hydraulic pipeline will cause the pressure inside the hydraulic system to drop, thus affecting the working efficiency of the machine.

2. Hydraulic oil leakage will cause insufficient hydraulic oil inside the hydraulic system, causing pressure drop, thus affecting normal operation.

3. Failure of the hydraulic pump will cause the hydraulic system to be unable to obtain sufficient pressure and flow, thus causing pressure relief.

Treatment methods for splash oil leakage:

1. Check the hydraulic pipelines and joints in time to determine the location of the oil leakage, and then repair and replace them.

2. Check the hydraulic oil tank, return oil filter, hydraulic oil filter element and other components to see if there is any damage, filter element blockage or insufficient hydraulic oil, and deal with them in time.

3. Check whether the inlet and outlet of the hydraulic pump are normal. If not, the hydraulic pump needs to be repaired or updated.

4. Perform a comprehensive inspection of the hydraulic system of the cone machine to ensure that each component functions properly, thereby eliminating any possible causes of hydraulic pressure relief.

5. Use high-quality hydraulic oil to ensure the normal operation of the hydraulic system and reduce the risk of hydraulic pressure relief.

6. Check the wear of the O-ring between the drive shaft frame and the main frame, the nylon sealing ring between the oil collector and the oil slinger, and the O-ring between the oil slinger and the drive shaft. If there is wear and deformation, replace them.

7. Check whether there is dirt in the main drain hose or pipeline, and whether there is dirt in the long hole of the drive shaft frame under the drive shaft. If there is dirt, clean it up in time.

The above is the introduction of the causes and treatment methods of oil splashing and leakage of multi-cylinder hydraulic cone crusher by XinGaoNai. This problem should be dealt with in time to ensure the normal operation of the cone crusher. At the same time, the cone crusher should be maintained regularly to reduce the occurrence of various problems and increase the service life of the equipment.

From August 25th to October 6th, Xin Gaonai will hold a large-scale promotion with the lowest price of the year.