When does the sand making machine rotor need to be leveled?

The rotor is the core component of the sand making machine.（Stone Crusher） The balance state of the rotor has a crucial impact on the normal operation of the sand making machine and the production efficiency of the sand and gravel production line. Therefore, pay attention to the balance state of the rotor and understand when the sand making machine rotor Leveling is required and it is very important to do it promptly. The rotor of the sand making machine generally needs to be leveled under the following circumstances:

During initial installation: The new rotor may be initially unbalanced due to assembly errors or uneven component mass distribution, and balance correction is required at this time.

After repair work: After the rotor repair work, such as hardening, in order to ensure the stable operation of the rotor and the normal operation of the machine, the rotor leveling correction is required.

After replacing wearing parts: Wear-resistant parts on the rotor such as blades, hammers, etc. will wear unevenly due to long-term use. When the impeller or other wearing parts are replaced, the rotor needs to be rebalanced and calibrated to ensure the overall balance of the rotor. Avoid unstable operation.

After long-term operation: During long-term operation, the rotor may become unbalanced due to wear and impact force. In order to restore the balance of the rotor, the rotor needs to be leveled to ensure that the rotor rotates at high speed. It can work stably, reduce vibration and noise, and improve the production efficiency of the sand making machine.

When the machine vibrates abnormally: When the sand making machine has obvious intensification of vibration, noise, and bearing temperature during operation, but the wear plate is in good condition, it is necessary to stop the machine and check the balance of the rotor because the rotor Imbalance may cause excessive machine vibration, affecting sand making efficiency and the service life of the spindle assembly.

During regular maintenance: Preventive balance correction can effectively extend the life of the equipment and reduce the failure rate, because during the daily operation of the sand making machine, the rotor may be affected by various factors, such as uneven distribution of materials, Changes in impact force, etc., these factors may cause the rotor to gradually lose balance. Therefore, in order to prevent this, in accordance with the equipment manufacturer's recommendations or actual production experience, regular maintenance should also include the rotor balance check to ensure timely Discover and solve potential imbalance problems to ensure long-term stable operation of the sand making machine.

To sum up, the sand making machine rotor needs to be leveled during specific maintenance cycles, parts replacement or obvious performance degradation. Leveling operations usually include cleaning the rotor and its accessories, confirming the availability of the rotor, replacing necessary parts, Steps such as measuring and weighting, correcting balance, and rechecking balance.

In addition, it should be noted that the leveling of the sand making machine rotor is a key operation, which ensures the stable operation and efficient production of the sand making machine. When performing the sand making machine rotor leveling operation, professional balancing equipment and Technology, when performing leveling operations, the manufacturer's guidance and relevant safety regulations should also be followed to ensure the correctness and safety of the operation.

The core component of Xingao Heavy Industry's sand making machine, the rotor, is carefully made of strictly selected high-quality materials. Every rigorous material selection and every fine polishing embodies Xingao Heavy Industry's insistence on quality and technological innovation. The unremitting pursuit not only ensures the high strength and wear resistance of the equipment, but also greatly extends the service life of the equipment and achieves the perfect combination of high performance and stability. If you have any relevant needs, please feel free to inquire!